Fomicom foams are well suited to both cold, hot and cryogenic insulation. Piping, tubing, valves etc. can be fitted with a layer of polyurethane which insulates but is also just as good at avoiding condensation and preventing corrosion. The PUR foam can be injected in the metal casings (metal jacketing) which are placed at the desired distance from the piping work using spacers. In this way, cold –and heat loss are able to be avoided. This technical insulation technique is used among others in offshore insulation, shipping insulation, petrochemical insulation, process industry, fireproof insulation and pipeline insulation. Often this PU 2-component foam injection is technically combined with the use of pre-shaped scales.
Recommended Fomicom products:
- FROTH-PAK: The FROTH-PAK sprayfoam can easily be sprayed on any surface such as metal, wood, plastic, stone,… FROTH-PAK is also suitable for injection. If wanted, an injecting tube can be mounted on the spray nozzle so the foam can be injected in a hard to reach place.
- FLOW-FOAM: The FLOW-FOAM pour in place foam can be injected in closed molds. The injected liquid starts rising after some minutes and perfectly fills the space.
- FAST-PUR: Same properties as FROTH-PAK, for non-EU customers.
Subscribe to our Newsletter.