Modular building, home offices, swimming pools, garden houses,…containers are used for a wide range of applications. To avoid condensation on the metal it is sufficient to spray a layer of 2-3 cm on the surface. In case of insulation, you can determine the thickness of the foam layer according to your wishes. The foam can be sprayed directly on the surface. The only requirement is that the metal is dust free and not greasy so the adhesion is optimal.
Refrigerated containers need to be repaired often due to the damage they suffer during their transit. Once the damaged piece of the container has been structurally repaired, the polyurethane foam is injected and the container is once again available for transport. The portable refillable PU foam kits in cylinders are ideally suited for small to medium repairs. Via injection points it is possible to spray insulation foam into the double wall cavity, leading to the creation of a seamless, watertight and condensation-free insulation. Fomicom foams also helps to contribute to the general structural reinforcement of the container.
Recommended Fomicom products:
- FROTH-PAK: The FROTH-PAK sprayfoam can easily be sprayed on any surface such as metal, wood, plastic, stone,… FROTH-PAK is also suitable for injection. If wanted, an injecting tube can be mounted on the spray nozzle so the foam can be injected in a hard to reach place.
- FLOW-FOAM: The FLOW-FOAM pour in place foam can be injected in closed molds. The injected liquid starts rising after some minutes and perfectly fills the space.
- FAST-PUR: Same properties as FROTH-PAK, for non-EU customers.